The picture shows the leg being cut to length by tree loppers. Legs are supplied in 1 metre lengths, which is the deepest pond that can be protected without a special order being placed. A leg should be placed approximately every 1 metre along each beam and preferably at each end of the beam and…
The cord passes all the way through each beam and is anchored outside the perimeter of the pond using either ground stakes (SP15) or ceiling anchors (SP16). Excess cord is then cut away. Alternatively, a hole can be drilled 7cm from the end of the beam, on the underside, and a shorter length of rope…
It may be necessary to protect the support cord from lawnmowers, grass strimmers or animals. This is achieved by using the support cord cover which is passed over the exposed length of cord and cut to length. It is not always required but is included in the standard pack.
It may be necessary to protect the support cord from lawnmowers, grass strimmers or animals. This is achieved by using the support cord cover which is passed over the exposed length of cord and cut to length. It is not always required but is included in the standard pack.
The shield anchor is used in pond edges such as brick, solid slab edges or solid stone surrounds. A 6.0mm hole is drilled at the relevant point to receive the shield anchor. Tap in the anchor gently to prevent the hole in the anchor from closing up. T he support cord is then passed into…
No products in the basket.
